HLG- Landing Gear

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Tail Rotor H-60 and S-70 Tail Rotor Pylon Kit Covers the most common tail rotor and pylon service operations on the H-60 / S-70i. All tools made with the highest quality materials and MILspec anti-corrosion coatings. All tools incorporate key usability improvements over legacy solutions. Kit is delivered in Pelican case with custom foam insert # PN DESCRIPTION 1 PBP-60-A H-60 Tail Rotor Pitch Beam Puller 2 TRSP-60-AA H-60 Tail Rotor Star Plate 3 TRAIT-60-AA H-60 Tail Rotor Assembly Inspection Tool (Qty 2) 4 PBS-60-AA H-60 Tail Rotor Pitch Beam Nut Spanner 5 SCC-60-AA H-60 Spring Cylinder Clamp 6 TRQD-60-AA H-60 Tail Rotor Quick Disconnect Wrench 7 TRK-60-AA H-60 Turnbuckle Rigging Kit (Qty 2) 8 PTA-60-AA H-60 Tail Pylon Torque Adapter 9 PBRW-60-AA Tail Rotor Pivot Bearing Replacement Wrench 10 PF-60-AA H-60 Protractor Fixture 11 SBRT-60-AA H-60 Stabilator Bolt Removal Tool 12 SLP-60-AA H-60 Stabilator Position Sensor Limit Switch Lockpin 13 TRDB-60-AA 9/16” Dogbone Torque Adapter 14 CBP-60-AA H-60 Outboard Retention Plate Center Bushing

TOOLS OFFERED FOR LANDING GEAR

  • STRUT PRESSURE GAUGE
  • MAIN LANDING GEAR SOCKET AND ADAPTER
  • STRUT TORQUE ADAPTER
  • TAIL YOKE WASHER ALIGNER
  • HYDRAULIC SERVICING KIT

Featured Items

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Tail Yoke Washer Aligner HLG-TYWA-1 TYT-60-AA

Tail Yoke Washer Aligner

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
This tool ensures accurate torque checking of the Aft Main Mod Mount Bolts under the Rotor Brake, aligning the Teflon washer to minimize bonding errors and avoiding the need for re-bonding..
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI HLG-HSK-1 Strut Torque Adapter HLG-STTA-1 STA-60-AA

Strut Torque Adapter

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
The tool design provides a high-strength, precision-fit tool to access and loosen the lower Strut securing nut, minimizing the need to remove the Main Landing Gear Brake Assembly.
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI HLG-HSK-1 Brake/Strut/Damper Servicing Kit for H-60 A/L/M The H-60 Brake/Strut/Damper Servicing Kit (BSD-60-AA) has the correct components to perform all hydraulic servicing tasks on the aircraft, in one all-inclusive accountable and portable kit, eliminating the need to search for all components needed to service. Each hydraulic hose assembly has been re-engineered from the ground up with the end user in mind, simplifying and accelerating each procedure.

Hydraulic Servicing Kit

Tool Maintenance to save money cost savings
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
The comprehensive and portable hydraulic service kit includes all essential components such as unions, valves, lines, couplings, and fittings for bleeding and servicing brakes, struts, and dampers, resulting in significant labor reduction.