HXMSN Transmission

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Transmission and Drives Hawk Transmission and Drives Kit HXMSN-102 Transmission Service Kit (XMSKA-60-AA for A Models, XMSKLM-60-AA for L/M Models) for A/L/M contains key peculiar hand tools to service the main transmission of the aircraft. Kit contents: ZBAR-60-AA: H-60 Main Module Hardware Installation Tool CDR-60-AA: H-60 XMSN Chip Detector Removal Tool FBR-60-AA: H-60 Main Mod XMSN Oil Filter Bowl Shut Off/Rem. Tool PRTA-60-AA: H-60 Pitch Change Rod Torque Adapter RBTA-60-AA: H-60 AFT Main Mod Mount Bolt Torque Adapter MMS-60-AA: H-60 3/4 Drive, 11/16 Socket for Main Module Hardware SRT-60-AA: H-60 Gearbox Spline Removal Tool GBSP-60-AA: H-60 Gearbox Seal Removal Tool

TOOLS OFFERED FOR TRANSMISSION

  • MAIN MODULE HARDWARE INSTALLER AND SOCKET
  • PITCH CHANGE ROD TORQUE ADAPTER
  • GERBOX SPLINE REMOVER
  • INPUT MODULE FLANGE EXTRACTOR
  • TRANSMISSION INSTALLATION SEAL SET
  • OIL PUMP INSTALLER
  • GEARBOX SEAL EXTRACTOR
  • MAIN MODULE BOLT TORQUE ADAPTER
  • CHIP DETECTOR EXTRACTOR
  • OIL FILTER REMOVAL TOOL

Featured Items

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Transmission and Drives Oil Filter Removal Tool HXMSN-OFRA-1 HXMSN-OFRLM-1 FBRLM-60-AA FBRA-60-AA H-60 Main Mod XMSN Oil Filter Bowl Rem. Tool L/M

Oil Filter Removal Tool

Tool Maintenance to save money cost savings
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Right Tools for Safety
Designed for extracting the oil filter, this tool prevents spillage of hot XMSN oil, ensures controlled navigation past the packing to capture oil within the bowl and line, and prevents damage to various components.
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Transmission and Drives Main Mod Bolt Torque Adapter HXMS-MMBT-1 RBTA-60-AA

Main Module Bolt Torque Adapter

Tool Maintenance to save money cost savings
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
This tool ensures torque checks on the Aft Main Mod Mount Bolts beneath the Rotor Brake, conducting 9-11 torque checks without removing the Rotor Brake and HSS.
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Transmission and Drives Gearbox Seal Extractor HXMS-GBSE-1 GBSP-60-AA

Gearbox Seal Extractor

Tool Maintenance to save money cost savings
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Right Tools for Safety
This universal tool, compatible with all sacrificial spline adapters, efficiently removes input and output seals on all gearboxes as per TM1-1520-237-23.
H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Transmission and Drives Chip Detector Extractor HXMS-CDE-1 CDR-60-AA

Chip Detector Extractor

H-60 S-70 HH-60 MH-60 SH-60 H60 S70 HH60 MH60 SH60 Blackhawk Tools Maintenance PMI Spindle Puller for UH-60 A/L/M The H60 Main Rotor Blade (SP-60-AA) Spindle Puller is used to effectively pull the spindle free from the Main Rotor Hub Assembly. As a one-person task, it is designed to control the removal of the spindle, even if stuck due to corrosion or abrasion. Every Spindle Puller is delivered in a Pelican case with custom MIL-spec foam cushioning, allowing for easy and safe transportation or storage. The Spindle Puller is comprised of a single base plate with three ACME driver assemblies threaded to hex nut holders that push against the main rotor hub. The driver assembly rods have driver feet that allow to for self-articulation and adjustment when pushing against the hub. Spindle stainless steel cross pins with retaining plungers are inserted into the main rotor blade cuff lugs allowing the tool to safely pull the spindle free from the hub as it pushes against the base plate. A safety retention nylon webbing attached to the spindle plate, using a safety retainer puck inserted into the hub spindle inspection port, catches the spindle once it is freed, preventing it from being dropped
The Chip Detector Extractor Tool snugly fits onto the chip detector sleeve, enabling rotation for XMSN chip light control, streamlining the task with one-person operation and reducing the risk of component damage.